We are manufacturers of Potassium stearate or Potassium octadecanoate, Pharmaceutical Excipients chemicals. We offer Halal and Kosher Potassium stearate or Potassium octadecanoate made in an ISO9001, ISO22000 (FSSC22000) cGMP and GLP certified facility.
The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal

Home ---------- Contact

Packing Liquids Bulk Storage

Potassium stearate or Potassium octadecanoate SDS GHS of Manufacturers Suppliers Exporters

CAS Number: 593-29-3, EINECS EC Number: 209-786-1, Molecular Formula: C18H35KO2 or CH3(CH2)16COOK, Molecular Weight: 322.6

Potassium stearate suppliers

Specifications Sheet of Potassium stearate or Potassium octadecanoate Manufacturers Suppliers Exporters

Potassium stearate or Potassium octadecanoate SDS, Safety Data Sheet
MSDS, Material Safety Data Sheet

SECTION 1 - IDENTIFICATION OF THE PRODUCT AND THE COMPANY

Product Name & Other Names : Potassium stearate or Potassium octadecanoate.
CAS No.: 593-29-3
EINECS EC Number: 209-786-1
Chemical Formula: C18H35KO2 or CH3(CH2)16COOK
Molecular Weight: 322.6
Relevant uses and uses advised against (if any): Industrial Manufacturing.

SECTION 2 - HAZARD IDENTIFICATION OF THE PREPARATION

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

Labeling according to GHS & Regulation (EC) No 1272/2008

GHS Label Elements
NONE

Signal Word: None

Hazards not otherwise classified (HNOC):
May form combustible dust concentrations in air.
May cause mild skin irritation.
May cause mild eye irritation.

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.

SECTION 3 - COMPOSITION/INFORMATION ON INGREDIENTS

Product Name & Other Names: Potassium stearate or Potassium octadecanoate.
CAS No.: 593-29-3
EINECS EC Number: 209-786-1

SECTION 4 - FIRST-AID MEASURES

Skin: Immediately remove any contaminated clothing. Wash contaminated area thoroughly with soap and copious amounts of water for at least 15 minutes. If irritation or adverse symptoms develop, seek medical attention.
Eyes: Remove any contact lenses at once. Flush eyes with water for at least 15 minutes. Ensure adequate flushing by separating the eyelids with fingers. If irritation or adverse symptoms develop, seek medical attention.
Ingestion: Contact a physician immediately.
Remove to fresh air, if coughing, breathing becomes labored, irritation develops or other symptoms develop, seek medical attention at once, even if Inhalation symptoms develop several hours after the exposure.

SECTION 5 - FIRE-FIGHTING MEASURES

Flammable Limits: Not established.
Fire Extinguishing Media: Water spray, foam, carbon dioxide or dry chemical.
Special Fire Fighting Procedures: Burning will produce toxic fumes. Firemen should be equipped with SCBA with a full-face piece operated in the positive pressure demand mode with appropriate turnout gear and chemical resistant personal protective equipment. Move containers from fire area if you can do so without risk. Use standard firefighting procedures and consider the hazards of other involved materials.
Unusual Fire & Explosion Hazards: Concentrated dust may present an explosion hazard.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used.

SECTION 6 - ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment, and emergency procedures: Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container. Clean up spills in a manner that does not disperse dust into the air. Use non-sparkling tools and equipment. Reduce airborne dust and prevent scattering by moistening with water.

SECTION 7 - HANDLING AND STORAGE

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Avoid dust formation and control ignition sources. Employ grounding, venting and explosion relief provisions in accord with accepted engineering practices in any process of capable of generating dust and/or static electricity. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Do not store with incompatible materials like strong oxidizing agents and peroxides, strong mineral acids.

SECTION 8 - EXPOSURE CONTROL/PERSONAL PROTECTION

USA ACGIH Threshold Limit Values: 10 mg/m3 TWA.
Respiratory Protection:
 Work ambient concentrations should be monitored and if airborne concentrations are expected to exceed acceptable levels wear a NIOSH/MSHA approved dust air purifying respirator. When using respirators refer to OSHA’s 29CFR 1910.134.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards.

SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES

Appearance: White powder.
Odor: Slight fatty odor.
Odor threshold: No data found.
pH: No data found.
Relative density: No data found.
Melting point/freezing point: No data found.
Initial boiling point and boiling range: 359C to 360C.
Flash Point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility(ies): Soluble in water.
Viscosity: Not available.

SECTION 10 - STABILITY AND REACTIVITY

Incompatibility: Avoid contact with peroxides, strong mineral acids, and strong oxidizing agents.
Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Carbon dioxide, carbon monoxide and potassium oxide.
Hazardous Polymerization: Will not occur.

SECTION 11 - TOXICOLOGICAL INFORMATION

Toxicity to animals: No data found.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible, or confirmed human carcinogen by IARC.
Mutagenic Effects: No data found.
Teratogenic Effects: No data found.
Developmental Toxicity: No data found.
Reproductive Effects: No data found.

SECTION 12 - ECOLOGICAL INFORMATION

No significant data is available on the product. The product should be prevented from entering drains, sewers, streams, etc.
Persistence and Degradability: Unlikely to persist due to water solubility.
Mobility: Likely to be mobile due to water solubility.
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

SECTION 13 - DISPOSAL CONSIDERATIONS

Prevent material from entering drains, sewers, streams, etc. Immediately dispose of waste material in accordance with law.

SECTION 14 - TRANSPORT INFORMATION

DOT USA, TDG Canada & ADR/RID Europe: Not regulated
IMO/IMDG: Not regulated.
IATA: Not regulated.

SECTION 15 - REGULATORY INFORMATION

USA Regulations:
California Proposition 65: Not listed.

16. OTHER INFORMATION

Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************

Potassium stearate or Potassium octadecanoate Manufacturers:

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

e-mail: anmolc@mtnl.net.in

Copyright and Usual Disclaimer is Applicable. 2 February, 2022

Exporters to USA, Canada, UAE, Dubai, Egypt, Turkey, Mexico, Brazil, Chile, Argentina, Europe, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, etc.